Boiler Water Treatment

Anti Scale
Anti scale for boiler water treatment is an anhydrous free flowing tan powdered water treatment. The product is a balanced blend of phosphates, dispersing agents, antifoam agent and scale inhibitors. Anti scale boiler water treatment is mildly alkaline. Furthermore, anti scale boiler water treatment is normally used in conjunction with other boiler water additives, such as oxygen scavengers and/or amines, to provide a complete treatment for medium to large high and low pressure boilers. For specific recommendations for a particular condition, please contact our technical representatives.

Features:
- Completely non toxic
- Safe from toxic
- Instantly soluble in water
- Effective at low concentrations
- Does not cause priming or carryover
- Contains no CO2 producing chemicals
- Gives a mild alkalinity value to the boiler water and control foam
- Contains crystal modifiers to prevent scale formation on heating surfaces
- Contains organic dispersants, which have been proved to control the size fluidity of precipitated solids. Thus, ensuring maximum protection against sludge accumulation.

Handling:
Anti scale for boiler water treatment is quite safe for normal handling procedures. Keep out of reach of children.

Packaging:
Anti scale for boiler water treatment is packed in 24kg and 200kg containers.

Oxygen Scavenger
Oxygen scavenger is clear water white liquid designed specifically as a concentrated oxygen scavenger in steam and hot water boilers.

Features:
- Easy to use liquid product
- Compatible with other boiler chemicals at use concentrations.
- Does not contribute to TDS levels in the boiler
- Works at very low concentrations
- Non-flammable

Method of Use:
- Steam Boilers
Solutions are normally dosed into the feed water line on the suction side of the feed pump by means of a dosing pump.

- Hot Water Boilers:
Oxygen scavenger is normally dosed in the concentrated form through an on-line dosing pot feeder.

Handling:
Oxygen scavenger is a concentrated chemical and care should be exercised when handling. Workers should wear goggles, gloves, and protective clothing. Rinse any splashing immediately with copious quantity of water. If burns occur, seek medical attention.

Packaging:
Oxygen scavenger is packed 20 liters and 205 liters drums.

Food Grade Completed Treatment
Food grade completed treatment is a concentrated blend of organic corrosion inhibitors, dispersing agents, and oxygen absorbers, specially formulated for broad-spectrum boiler water treatment.
Features:
- Prevents scale formation by converting precipitated hardness salt into a fine flocculent mobile sludge, which is removed by blowdown.
- Stop oxygen corrosion by absorbing the residual trace of dissolved gas.
- Provides a monomolecular film on internal boiler surfaces to prevent corrosion, while not impairing heat transfer properties.
- Does not cause “excessive dissolved solids” problems, even if greatly overdosed, as it contributes very little to T.D.S. figures.
- Does not require specialized personnel to control. Unskilled staff can easily perform the few steps to maintain correct values in the boiler.
- It is not hazardous or dusty to use or handle, as it is a mild, non-toxic liquid compound.
- Extremely economical in use.

Handling:
Food grade complete treatment is relatively non-toxic material, but repeated contact will cause drying of the skin.

Packaging:
Food grade complete treatment is packed in 20 liters and 205 liters drums.